Stainless steel wire rope has a very wide range of applications in many industries. Foreign countries have been widely used in pipelines inside and outside buildings. Generally, two types of stainless steel steel are used: 304 stainless steel wire rope and 316 stainless steel wire rope. Compared with other material pipes, stainless steel wire rope has the following advantages:

1.Coated stainless steel wire rope has good corrosion resistance;
2.316 stainless steel wire rope is strong and ductile;
3. Easy to form and weld;
4. Not limited by the water velocity, the maximum velocity can reach 30 m/s;
5. Suitable for all kinds of drinking water chemical composition;
6. The amount of maintenance is small, so the life cycle cost is low;
7. A variety of connection methods and different types of joints;
8. In addition to the need to control bacteria, no water treatment agent is required;
9. Non-toxic;
10. 100% recycling;

The initial cost of 316 stainless steel wire rope is generally relatively high, but there are many ways to save costs. For example, it does not require corrosion-resistant coating, which can reduce the cost of spare equipment; stainless steel parts are light in weight and require less structural support. ; Lighter parts, lower transportation and installation costs; high flow rate means that small diameter pipes can be used, no corrosion allowance is required, and the thickness of the pipe wall can be reduced.

Although the initial cost of 316 stainless steel wire rope is higher, its life cycle cost is generally higher due to the saving of use cost. The smooth inner surface can reduce the energy consumed by the pump, can reduce the number of inspections and costs, and reduce the maintenance cost. No need to coat again, no need to replace, reduce downtime, and extend the service life. After using 316 stainless steel wire rope, it can be 100% recycled and reused.